Home
Create and Use Measuring Points
Measuring Points refer to the physical and/or logical metrics at an instance. For example, the temperature of a boiler at a specific time or the revolutions per minute (rpm) of a motor.
Create Measuring Point
Learn how to create a Measuring Point.

Title and Copyright
Copyright and Terms of Use page for mWorkOrder.
Preface
Understand audience, know related documents and products and conventions followed in this document.
About the mWorkOrder Application
Maintain your assets using mWorkOrder, a mobile work order management solution from Innovapptive. mWorkOrder leverages SAP’s Plant Maintenance module.
Configure the mWorkOrder Application
Establish connection with the server before you start using the mWorkOrder application.
Get Started with the mWorkOrder Application
Once you connect to the server, you can login to the mWorkOrder application either using your credentials or by using App Passcode or Fingerprints.
Overview of the mWorkOrder Application
This chapter familiarizes you with the basic functionality of the mWorkOrder application.
How to use mWorkOrder in Offline mode
When the network connection is low or unstable, you can switch to offline mode and continue working. The transactions that you do in offline mode are stored in Offline Outbox. The records in the Offline Outbox are automatically posted to backend systems you switch from offline to online mode.
Monitor Asset Performance
Use the Operator Rounds module to assign a functional location or an equipment monitoring and maintenance tasks to operators. These scheduled tasks help the operator detect possible technical failures / equipment breakdown and avoid production losses.
Create Notifications when Equipment needs Repair / Inspection
When an equipment needs repair or inspection, you as a technician or supervisor can create a notification using the Notifications module requesting an inspection. After inspection of the equipment, the technician concerned creates a work order, if required or closes the notification if no anomaly is found.
Create, Assign and Execute Jobs / Work Orders
A Work Order refers to a job order created by quality inspector for maintenance or repair of an equipment. The work order, once raised, is sent to plant personnel.
Ensure Periodic Service to Equipment and Functional Locations
Create service notifications, service orders, document service completion and record all details of work done and track entire service history of equipment and functional location right within the mWorkOrder application.
Create and Use Time Sheets
Use Time Sheets module to create time sheets for yourself and your team members.
Create forms and capture & post data using Forms
Create forms (standalone) like checklists, emergency inspection and risk assessment forms and assign them to your team (field service technicians) to capture and post data.
Inspect materials at a plant
Inspection Lot is a formal request, which is sent to a plant for examining specific quantity of materials at a plant.
Confirm validation of materials at a plant
Create and Use Functional Locations
A Functional Location is the place where equipment is installed and maintained.
Add and Use Equipment Details
Equipment refers to the product/machine that needs to be maintained or repaired and this module helps you search the Equipment based on number, description, and location.
Search and View Technical Objects
Use the Technical Objects module to search and view technical objects such as Equipment and Functional Locations. This module helps you retrieve the information from both Equipment and Functional location list based on your search.
Create and Use Measuring Points
Measuring Points refer to the physical and/or logical metrics at an instance. For example, the temperature of a boiler at a specific time or the revolutions per minute (rpm) of a motor.
- Understand Measuring Point Screen
- Create Measuring Point
  Learn how to create a Measuring Point.
  - Add Attachment to Measuring Point
    This section guides you to add attachments to Measuring Point.
- View and Add Measurement Documents
  The History tab in Measuring Point module shows information about the Measurement Documents and the readings taken against measuring points. You can also add Measurement Documents. Measurement Documents contain measurement readings.
- View Measuring Documents in Graphical Mode
  You can view the Measuring Documents in a graphical representation and by tapping the line chart on the graph, you can view the measurement readings at any instance.
Application UI Across Different Platforms and Form Factors
This section showcases the UI across different form factors and platforms for this application.

Create Measuring Point

Learn how to create a Measuring Point.

To create a measuring point, perform the following tasks:

In the Home screen, tap the Create icon next to Measuring Points module.
Tap the Measuring Point Object field to select Equipment or Functional Location.
Enter the information for Maintenance Plant, Equipment, Functional Location, Characteristics, and Code Group.
Enter data in optional fields, such as Measuring Point as a Counter, Target Value, and Text.
Note:
- If you select the Measuring Point as a Counter check-box, you can optionally fill in the associated data like Counter Over Reading, Counter Data, Annual Estimate, and Text.
- Fields that are displayed depend on the UI validations configured in RACE.
Tap Save.

In the pop up screen, tap View MP List to navigate to the created record.

Figure 1. Create Measuring Point