Home
Create and Use Measuring Points
Measuring Points refer to the physical and/or logical metrics at an instance. For example, the temperature of a boiler at a specific time or the revolutions per minute (rpm) of a motor.
Understand Measuring Point Screen

Title and Copyright
Copyright and Terms of Use page for mWorkOrder.
Preface
Understand audience, know related documents and products and conventions followed in this document.
About the mWorkOrder Application
Maintain your assets using mWorkOrder, a mobile work order management solution from Innovapptive. mWorkOrder leverages SAP’s Plant Maintenance module.
Configure the mWorkOrder Application
Establish connection with the server before you start using the mWorkOrder application.
Get Started with the mWorkOrder Application
Once you connect to the server, you can login to the mWorkOrder application either using your credentials or by using App Passcode or Fingerprints.
Overview of the mWorkOrder Application
This chapter familiarizes you with the basic functionality of the mWorkOrder application.
How to use mWorkOrder in Offline mode
When the network connection is low or unstable, you can switch to offline mode and continue working. The transactions that you do in offline mode are stored in Offline Outbox. The records in the Offline Outbox are automatically posted to backend systems you switch from offline to online mode.
Monitor Asset Performance
Use the Operator Rounds module to assign a functional location or an equipment monitoring and maintenance tasks to operators. These scheduled tasks help the operator detect possible technical failures / equipment breakdown and avoid production losses.
Create Notifications when Equipment needs Repair / Inspection
When an equipment needs repair or inspection, you as a technician or supervisor can create a notification using the Notifications module requesting an inspection. After inspection of the equipment, the technician concerned creates a work order, if required or closes the notification if no anomaly is found.
Create, Assign and Execute Jobs / Work Orders
A Work Order refers to a job order created by a quality inspector for maintenance or repair of an equipment. The work order, once raised, is sent to plant personnel.
Ensure Periodic Service to Equipment and Functional Locations
Create service notifications, service orders, document service completion and record all details of work done and track entire service history of equipment and functional location right within the mWorkOrder application.
Create and Use Time Sheets
Use the Time Sheets module to create time sheets for yourself and your team members.
Create forms and capture & post data using Forms
Create forms (standalone) like checklists, emergency inspection and risk assessment forms and assign them to your team (field service technicians) to capture and post data.
Inspect materials at a plant
Inspection Lot is a formal request, which is sent to a plant for examining specific quantities of materials at a plant.
Confirm validation of materials at a plant
Create and Use Functional Locations
A Functional Location is the place where equipment is installed and maintained.
Check Plant and Storage Location Stock
If you are using Stock Overview module, check the following link,
Add and Use Equipment Details
Equipment refers to the product/machine that needs to be maintained or repaired and this module helps you search the Equipment based on number, description, and location.
Search and View Technical Objects
Use the Technical Objects module to search and view technical objects such as Equipment and Functional Locations. This module helps you retrieve the information from both Equipment and Functional location lists based on your search.
Create and Use Measuring Points
Measuring Points refer to the physical and/or logical metrics at an instance. For example, the temperature of a boiler at a specific time or the revolutions per minute (rpm) of a motor.
- Understand Measuring Point Screen
- Create Measuring Point
  Learn how to create a Measuring Point.
- View and Add Measurement Documents
  The History tab in the Measuring Point module shows information about the Measurement Documents and the readings taken against measuring points. You can also add Measurement Documents. Measurement Documents contain measurement readings.
- View Measuring Documents in Graphical Mode
  You can view the Measuring Documents in a graphical representation and by tapping the line chart on the graph, you can view the measurement readings at any instance.
Application UI Across Different Platforms and Form Factors
This section showcases the UI across different form factors and platforms for this application.

Understand Measuring Point Screen

The Measuring Point screen is divided into two sections:

Image of measuring point screen — Figure 1. Measuring Point Screen

The left side section of the Measuring Point screen includes the following:

Measuring Point list and description, type and status.
Search box to search a specific measuring point
Sort button to sort the measuring point
Filter button to filter the measuring point

The right-side section of the Measuring Point screen includes the following:

General: View or edit the details of a measuring point including the characteristic of the measuring point, standard measurement unit, counter reading, annual estimate, and measuring limit range (upper & lower limit).
Attachments: View the document associated with the measuring point that is being displayed. You can configure the attachment (to be retrieved) size in RACE that will allow the mWorkOrder application to retrieve the attachments within the configured size.
History: View the history of the calibration readings that have been recorded on specific dates that includes information, such as the respective reading instances and the associated measuring document IDs. Users can also add Measuring Documents.

The screen sequence for all these tabs can be configured through RACE.

Note:

By default, the General tab should always be in first position and cannot be configured.